/ Forside / Teknologi / Hardware / Bundkort / Nyhedsindlæg
Login
Glemt dit kodeord?
Brugernavn

Kodeord


Reklame
Top 10 brugere
Bundkort
#NavnPoint
tedd 7545
BjarneD 3920
peet49 3555
Gambrinus 2905
dk 2525
Klaudi 1680
Manse9933 1215
dos-man 1010
Brommi 1005
10  srhansen 945
Temperatur ?
Fra : Kim


Dato : 29-01-05 20:21

Jeg har fået et ChainTech PM800 8235
bundkort, men hvor i BOIS ser man
temperaturen på ens cpu ?

Hvis man kan...

Jeg har installeret SiSoftware Sandra Pro 2005
og kan heller ikke her finde noget om temperaturer
på bundkortet.

Jeg kan ej heller intet sted i manualen finde det.

Kan nogen her venligst hjælpe ?

Håber det er den rigtige gruppe.

Mvh Kim



 
 
Allan / Kolding (29-01-2005)
Kommentar
Fra : Allan / Kolding


Dato : 29-01-05 22:07

Prøv at install. en af følgende :

Speedfan
http://www.almico.com/speedfan.php

Everest Home Edition ( Efter min mening rigtig god da man kan meget mere med
den )
http://www.lavalys.com/products.php?lang=en

--
Allan / Kolding



Kim (30-01-2005)
Kommentar
Fra : Kim


Dato : 30-01-05 00:01

"Allan / Kolding" <bruhn.allan@_V_Æ_K_stofanet.dk> skrev
> Speedfan
> http://www.almico.com/speedfan.php

Har lige prøvet SpeedFan 4.20 og det siger at
der åbenbart kun er sensors på mine HD.

I/O properly initialized
Linked ISA BUS at $0290
Linked VIA VT8235 SMBUS at $0500
Scanning ISA BUS at $0290...
SuperIO Chip=IT8705F
Scanning VIA SMBus at $0500...
SMART Enabled for drive 0
Found ST340016A (40,0GB)
SMART Enabled for drive 1
Found ST380021A (80,0GB)
End of detection

> Everest Home Edition ( Efter min mening rigtig god da man kan meget mere
> med den )
> http://www.lavalys.com/products.php?lang=en

Har prøvet everesthome110 viser kun HD temp
Overhovedet ikke min CPU.

SiSoftware Sandra siger :

System
Manufacturer : VIA Technologies, Inc.
Model : PM800-8235
ID : FFFFFFFF-FFFFFFFF-FFFFFFFF-FFFFFFFF

Mainboard
Manufacturer : ProTech
MP Support : 1 CPU(s)
MPS Version : 1.40
Model : PM800-8235
System BIOS : 07/08/2004-PM800-8235-MV7L2P60C-00

System Memory Controller
Location : Mainboard
Error Correction Capability : None
Number of Memory Slots : 4
Maximum Installable Memory : 2GB
Bank0/1 - A0 : None None None None DIMM 512MB
Bank2/3 - A1 : Empty
Bank4/5 - A2 : Empty
Bank6/7 - A3 : Empty

Chipset 1
Model : VIA Technologies Inc PM880 CPU to PCI Bridge
Bus(es) : ISA AGP PCI IMB USB FireWire/1394 i2c/SMBus
Front Side Bus Speed : 4x 199MHz (796MHz data rate)
Maximum FSB Speed / Max Memory Speed : 4x 200MHz / 2x 200MHz
Width : 64-bit
HTT - Hyper-Threading Technology : Yes
IO Queue Depth : 12 request(s)
Priority Master Queue Depth : 12 request(s)

Chipset 1 Hub Interface
Type : V-Link
Version : 4.0F
Width : 8-bit
Full Duplex : Yes
Multiplier : 1/1x
Speed : 4x 66MHz (264MHz data rate)
IO Queue Depth : 9 request(s)

Logical/Chipset 1 Memory Banks
Bank 0 : 256MB DDR-SDRAM 2.5-3-3-7CL 2CMD
Bank 1 : 256MB DDR-SDRAM 2.5-3-3-7CL 2CMD
Channels : 1
Bank Interleave : 4-way
Speed : 2x 165MHz (330MHz data rate)
Multiplier : 5/6x
Width : 64-bit
Power Save Mode : Yes
Fixed Hole Present : No

APIC 1
Version : 0.03
Speed : 16MHz
Multiplier : 1/2x
Maximum Interrupts : 24
IRQ Handler Engaged : Yes
Enhanced Support : Yes

Memory Module(s)
Memory Module 1 : 512MB 16x(32Mx8) DDR-SDRAM PC2700U-2533-700 (CL2.5 up to
167MHz) (CL2 up to 133MHz)

AGP Bus(es) on Hub 1
Version : 3.05
Speed : 8x 66MHz (528MHz data rate)
Multiplier : 1/2x
Fast-Writes Enabled : Yes
Isochronous Mode Enabled : No
Addressing Enabled : 32-bit
Aperture Size : 256MB

PCI Bus(es) on Hub 1
Version : 2.10
Number of Bridges : 1
PCI Bus 0 : PCI (33MHz)
Multiplier : 1/6x

LPC Hub Controller 1
Model : VIA Technologies Inc VT8235 PCI to ISA Bridge
ACPI Power Management Enabled : Yes
Multiplier : 1/4x
Speed : 8MHz
DMA Multiplier : 1/2x
DMA Speed : 4MHz

USB Controller 1
Model : VIA Technologies Inc VT82xxxxx UHCI USB 1.1 Controller (All VIA
Chipsets)
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No

USB Controller 2
Model : VIA Technologies Inc VT82xxxxx UHCI USB 1.1 Controller (All VIA
Chipsets)
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No

USB Controller 3
Model : VIA Technologies Inc VT82xxxxx UHCI USB 1.1 Controller (All VIA
Chipsets)
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No

USB Controller 4
Model : VIA Technologies Inc VT6202 USB 2.0 Enhanced Host Controller
Version : 2.00
Specification : 1.00
Interface : EHCI
Channels : 6
Companion Controllers : 3
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps) High (480Mbps)
Addressing Support : 32-bit
Legacy Emulation Enabled : No

FireWire/1394 Controller 1
Model : Creative Labs Audigy 2 Firewire Controller
Version : 1.10
Interface : OHCI
Enhanced Support : No
Channels : 64
Speed : 400MHz

System SMBus Controller 1
Model : VIA VT823x SMBus
Advanced TCO Mode Enabled : No
Slave Device Enabled : No
PEC Support : No
Speed : 16kHz

Expansion Slot(s)
PCI0 (1h) : PCI 32-bit +5V PME Full-Length Available (VIA Technologies Inc
ProSavageDDR P4X600 CPU to AGP Bridge)
PCI1 (2h) : PCI 32-bit +5V PME Full-Length Available
PCI2 (3h) : PCI 32-bit +5V PME Full-Length Used
PCI3 (4h) : PCI 32-bit +5V PME Full-Length Available
PCI4 (5h) : PCI 32-bit +5V PME Full-Length Available
AGP (8h) : AGP 32-bit +5V Full-Length Used (ATI Technologies Radeon
9700/9500 Series (R300))

Port Connector
PRIMARY IDE : None - ATA / None
SECONDARY IDE : None - ATA / None
FDD : 8251 FIFO - Floppy Disk / None
COM1 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male
COM2 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male
LPT1 : Parallel Port ECP/EPP - DB-25 pin female / DB-25 pin female
Keyboard : Keyboard - PS/2 / PS/2
PS/2 Mouse : Mouse - PS/2 / PS/2
USB0 : USB - None / None
AUDIO : Audio - None / None

Performance Tips
Notice 224 : SMBIOS/DMI information may be inaccurate.
Tip 2511 : Some memory slots are free so the memory can be easily upgraded.
Warning 100 : Large memory sizes should be made of Registered/Buffered
memory.
Tip 2546 : Large memory modules should be ECC/Parity.
Tip 2 : Double-click tip or press Enter while a tip is selected for more
information about the tip.

SiSoftware Sandra CPU og BIOS Information:

Processor
Model : Intel(R) Pentium(R) 4 CPU 2.80GHz
Speed : 2.79GHz
Performance Rating : PR3709 (estimated)
SMT Support : 2 Unit(s)
Type : Standard
Package : FC µPGA478
Rated Speed/FSB : 2800MHz / 4x 200MHz
Multiplier : 14/1x
Minimum/Maximum Multiplier : 0/1x / 14/1x
Generation : G8
Name : P4N (Northwood) Pentium 4C 130nm 1.6-3.4GHz 1.475-1.575V
Revision/Stepping : 2 / 9 (9)
Stepping Mask : D1
Microcode : MU0F2921
Core Voltage Rating : 1.550V
Maximum Physical / Virtual Addressing : 36-bit / 32-bit
Native Page Size : 4kB

Co-Processor (FPU)
Type : Built-in
Revision/Stepping : 2 / 9 (9)

Processor Cache(s)
Internal Data Cache : 8kB Synchronous, Write-Thru, 4-way set, 64 byte line
size
Internal Trace Cache : 12kB Synchronous, Write-Thru, 8-way set, 64 byte line
size
L2 On-board Cache : 512kB ECC Synchronous, ATC, 8-way set, 64 byte line
size, 2 lines per sector
L2 Cache Multiplier : 1/1x (2789MHz)

Upgradeability
Socket/Slot : Socket 478
Upgrade Interface : ZIF Socket
Supported Speed(s) : 2.79GHz+

Features
FPU - Co-Processor Built-in : Yes
VME - Virtual Mode Extensions : Yes
DE - Debugging Extension : Yes
PSE - Page Size Extension : Yes
TSC - Time Stamp Counter : Yes
MSR - Model Specific Registers : Yes
PAE - Physical Address Extension : Yes
MCE - Machine Check Exception : Yes
CX8 - Compare & Exchange Instruction : Yes
APIC - Local APIC Built-in : Yes
SEP - Fast System Call : Yes
MTRR - Memory Type Range Registers : Yes
PGE - Page Global Enable : Yes
MCA - Machine Check Architecture : Yes
PAT - Page Attribute Table : Yes
PSE36 - 36-bit Page Size Extension : Yes
PSN - Unique Serial Number : No
CLF - Cache Line Flush Support : Yes
DS - Debug Trace & EMON Store : Yes
ACPI - Software Clock Control : Yes
(W)MMX Technology : Yes
FXSR - Fast Float Save & Restore : Yes
SSE Technology : Yes
SSE2 Technology : Yes
SS - Self Snoop : Yes
HTT - Hyper-Threading Technology : Yes
TM - Thermal Monitor : Yes
PBE - Pending Break Enable : Yes
IA64 Technology : No
SSE3 Technology : No
MON - Monitor/MWait : No
DSCPL - CPL qualified Debug Store : No
EST - Enhanced SpeedStep Technology : No
TM2 - Thermal Monitor 2 : No
CID - Context ID : Yes
xTPR - Send Task Priority Messages : Yes
DAZ - Denormals Are Zero : Yes

Advanced Settings
Data Error Checking : No
Fast Strings : Yes
x86 FPU Compatibility Mode : No
Prefetch Queue : Yes
Branch Trace Storage : Yes
Data Cache Active Mode : Yes
IO Queue Depth : 12 request(s)
TM - Thermal Monitor : Yes

Machine Check Architecture Settings
Number of Reporting Banks : 4 bank(s)
Extended Machine Check Support : Yes
Number of Extended Reporting Banks : 12 bank(s)

Variable Range MTRR Settings
MTRR 0 : 00000000-1FFFFFFF (0MB-512MB) WB
MTRR 1 : C0000000-CFFFFFFF (3072MB-3328MB) WC

Fixed Range MTRR Settings
MTRR 0 Range 0 : 00000000-0000FFFF (0kB-64kB) WB
MTRR 0 Range 1 : 00010000-0001FFFF (64kB-128kB) WB
MTRR 0 Range 2 : 00020000-0002FFFF (128kB-192kB) WB
MTRR 0 Range 3 : 00030000-0003FFFF (192kB-256kB) WB
MTRR 0 Range 4 : 00040000-0004FFFF (256kB-320kB) WB
MTRR 0 Range 5 : 00050000-0005FFFF (320kB-384kB) WB
MTRR 0 Range 6 : 00060000-0006FFFF (384kB-448kB) WB
MTRR 0 Range 7 : 00070000-0007FFFF (448kB-512kB) WB
MTRR 1 Range 0 : 00080000-00083FFF (512kB-528kB) WB
MTRR 1 Range 1 : 00084000-00087FFF (528kB-544kB) WB
MTRR 1 Range 2 : 00088000-0008BFFF (544kB-560kB) WB
MTRR 1 Range 3 : 0008C000-0008FFFF (560kB-576kB) WB
MTRR 1 Range 4 : 00090000-00093FFF (576kB-592kB) WB
MTRR 1 Range 5 : 00094000-00097FFF (592kB-608kB) WB
MTRR 1 Range 6 : 00098000-0009BFFF (608kB-624kB) WB
MTRR 1 Range 7 : 0009C000-0009FFFF (624kB-640kB) WB
MTRR 2 Range 0 : 000A0000-000A3FFF (640kB-656kB) UC
MTRR 2 Range 1 : 000A4000-000A7FFF (656kB-672kB) UC
MTRR 2 Range 2 : 000A8000-000ABFFF (672kB-688kB) UC
MTRR 2 Range 3 : 000AC000-000AFFFF (688kB-704kB) UC
MTRR 2 Range 4 : 000B0000-000B3FFF (704kB-720kB) UC
MTRR 2 Range 5 : 000B4000-000B7FFF (720kB-736kB) UC
MTRR 2 Range 6 : 000B8000-000BBFFF (736kB-752kB) UC
MTRR 2 Range 7 : 000BC000-000BFFFF (752kB-768kB) UC
MTRR 3 Range 0 : 000C0000-000C0FFF (768kB-772kB) WP
MTRR 3 Range 1 : 000C1000-000C1FFF (772kB-776kB) WP
MTRR 3 Range 2 : 000C2000-000C2FFF (776kB-780kB) WP
MTRR 3 Range 3 : 000C3000-000C3FFF (780kB-784kB) WP
MTRR 3 Range 4 : 000C4000-000C4FFF (784kB-788kB) WP
MTRR 3 Range 5 : 000C5000-000C5FFF (788kB-792kB) WP
MTRR 3 Range 6 : 000C6000-000C6FFF (792kB-796kB) WP
MTRR 3 Range 7 : 000C7000-000C7FFF (796kB-800kB) WP
MTRR 4 Range 0 : 000C8000-000C8FFF (800kB-804kB) WP
MTRR 4 Range 1 : 000C9000-000C9FFF (804kB-808kB) WP
MTRR 4 Range 2 : 000CA000-000CAFFF (808kB-812kB) WP
MTRR 4 Range 3 : 000CB000-000CBFFF (812kB-816kB) WP
MTRR 4 Range 4 : 000CC000-000CCFFF (816kB-820kB) WP
MTRR 4 Range 5 : 000CD000-000CDFFF (820kB-824kB) UC
MTRR 4 Range 6 : 000CE000-000CEFFF (824kB-828kB) UC
MTRR 4 Range 7 : 000CF000-000CFFFF (828kB-832kB) UC
MTRR 5 Range 0 : 000D0000-000D0FFF (832kB-836kB) UC
MTRR 5 Range 1 : 000D1000-000D1FFF (836kB-840kB) UC
MTRR 5 Range 2 : 000D2000-000D2FFF (840kB-844kB) UC
MTRR 5 Range 3 : 000D3000-000D3FFF (844kB-848kB) UC
MTRR 5 Range 4 : 000D4000-000D4FFF (848kB-852kB) UC
MTRR 5 Range 5 : 000D5000-000D5FFF (852kB-856kB) UC
MTRR 5 Range 6 : 000D6000-000D6FFF (856kB-860kB) UC
MTRR 5 Range 7 : 000D7000-000D7FFF (860kB-864kB) UC
MTRR 6 Range 0 : 000D8000-000D8FFF (864kB-868kB) UC
MTRR 6 Range 1 : 000D9000-000D9FFF (868kB-872kB) UC
MTRR 6 Range 2 : 000DA000-000DAFFF (872kB-876kB) UC
MTRR 6 Range 3 : 000DB000-000DBFFF (876kB-880kB) UC
MTRR 6 Range 4 : 000DC000-000DCFFF (880kB-884kB) UC
MTRR 6 Range 5 : 000DD000-000DDFFF (884kB-888kB) UC
MTRR 6 Range 6 : 000DE000-000DEFFF (888kB-892kB) UC
MTRR 6 Range 7 : 000DF000-000DFFFF (892kB-896kB) UC
MTRR 7 Range 0 : 000E0000-000E0FFF (896kB-900kB) UC
MTRR 7 Range 1 : 000E1000-000E1FFF (900kB-904kB) UC
MTRR 7 Range 2 : 000E2000-000E2FFF (904kB-908kB) UC
MTRR 7 Range 3 : 000E3000-000E3FFF (908kB-912kB) UC
MTRR 7 Range 4 : 000E4000-000E4FFF (912kB-916kB) UC
MTRR 7 Range 5 : 000E5000-000E5FFF (916kB-920kB) UC
MTRR 7 Range 6 : 000E6000-000E6FFF (920kB-924kB) UC
MTRR 7 Range 7 : 000E7000-000E7FFF (924kB-928kB) UC
MTRR 8 Range 0 : 000E8000-000E8FFF (928kB-932kB) UC
MTRR 8 Range 1 : 000E9000-000E9FFF (932kB-936kB) UC
MTRR 8 Range 2 : 000EA000-000EAFFF (936kB-940kB) UC
MTRR 8 Range 3 : 000EB000-000EBFFF (940kB-944kB) UC
MTRR 8 Range 4 : 000EC000-000ECFFF (944kB-948kB) UC
MTRR 8 Range 5 : 000ED000-000EDFFF (948kB-952kB) UC
MTRR 8 Range 6 : 000EE000-000EEFFF (952kB-956kB) UC
MTRR 8 Range 7 : 000EF000-000EFFFF (956kB-960kB) UC
MTRR 9 Range 0 : 000F0000-000F0FFF (960kB-964kB) WT
MTRR 9 Range 1 : 000F1000-000F1FFF (964kB-968kB) WT
MTRR 9 Range 2 : 000F2000-000F2FFF (968kB-972kB) WT
MTRR 9 Range 3 : 000F3000-000F3FFF (972kB-976kB) WT
MTRR 9 Range 4 : 000F4000-000F4FFF (976kB-980kB) WT
MTRR 9 Range 5 : 000F5000-000F5FFF (980kB-984kB) WT
MTRR 9 Range 6 : 000F6000-000F6FFF (984kB-988kB) WT
MTRR 9 Range 7 : 000F7000-000F7FFF (988kB-992kB) WT
MTRR 10 Range 0 : 000F8000-000F8FFF (992kB-996kB) UC
MTRR 10 Range 1 : 000F9000-000F9FFF (996kB-1000kB) WT
MTRR 10 Range 2 : 000FA000-000FAFFF (1000kB-1004kB) WT
MTRR 10 Range 3 : 000FB000-000FBFFF (1004kB-1008kB) WT
MTRR 10 Range 4 : 000FC000-000FCFFF (1008kB-1012kB) WT
MTRR 10 Range 5 : 000FD000-000FDFFF (1012kB-1016kB) WT
MTRR 10 Range 6 : 000FE000-000FEFFF (1016kB-1020kB) WT
MTRR 10 Range 7 : 000FF000-000FFFFF (1020kB-1024kB) WT

PAT Settings
PAT 0 : WB
PAT 1 : WC
PAT 2 : UC-
PAT 3 : UC
PAT 4 : WB
PAT 5 : WC
PAT 6 : UC-
PAT 7 : UC

Performance Tips
Notice 224 : SMBIOS/DMI information may be inaccurate.
Tip 2 : Double-click tip or press Enter while a tip is selected for more
information about the tip.


Hvad gør en klog så ?

Mvh Kim



Allan / Kolding (30-01-2005)
Kommentar
Fra : Allan / Kolding


Dato : 30-01-05 00:40

Hvad hedder bundkortet helt nøjagtigt ?

Du kan se på deres hjemmeside om det er der.
Evt. lige kigge i manualen om der overhovedet
er HW monitor.

http://www.chaintech.com.tw/tw/eng/Download/dl_SubCate.asp?DCSNo=9#SPC41

--
Allan / Kolding



KLIP



Kim (30-01-2005)
Kommentar
Fra : Kim


Dato : 30-01-05 06:23

"Allan / Kolding" <bruhn.allan@_V_Æ_K_stofanet.dk> skrev
> Hvad hedder bundkortet helt nøjagtigt ?

ChainTech MPM800 ( 8235 )

> Du kan se på deres hjemmeside om det er der.
> Evt. lige kigge i manualen om der overhovedet
> er HW monitor.

Hvad betyder HW ?

Som jeg skrev:
> Jeg kan ej heller intet sted i manualen finde det.

Jeg har både orginal manual samt kasse fra MB.
Det var en kammerat der skiftede mit gamle MB
med dette, incl. isat en ny 400 W PSU,
Intel P4 2,8 Ghz cpu og 1 blok ram 512 DDR PC2700.

Så jeg har nærlæst manualen og der står intet sted
om sensorer der registrerer temp eller lign...

Hvad gør en klog så ?

Mvh Kim



Allan / Kolding (30-01-2005)
Kommentar
Fra : Allan / Kolding


Dato : 30-01-05 08:44

Hmmmm...

Ser godt nok ud som om at det ikke har
HW-monitor ( hardware monitor )

--
Allan / Kolding


KLIP



Kim (30-01-2005)
Kommentar
Fra : Kim


Dato : 30-01-05 09:50

"Allan / Kolding" <bruhn.allan@_V_Æ_K_stofanet.dk> skrev
> Ser godt nok ud som om at det ikke har
> HW-monitor ( hardware monitor )

Og dog, den måler jo temp. fint på mine HD ?
HD0 = 37 gr/C.
HD1 = 39 gr/C.

Er det et skod bundkort jeg her har fået, eller er
det tit normalt på mange bundkort at man ikke
kan checke ens cpu temp. ?

Eller kan det være en ledning min kammerat har
glemt at montere ?

Det er en af de største Zalman kølerer der sidder
på min P4 Intel 2.8 Ghz cpu, den med kobber alá denne:
http://www.edbpriser.dk/Listprices.asp?ID=24851
og med en regulering til hastigheden. Den larmer
overhovedet ikke ved max hastighed.

Jeg mener bare det kunne da være rart at
checke temp. har I andre her ikke det på
samme måde ?

Eller skal man bare være ligeglad, så længe der
ikke er problemer med maskinen ?

Mvh Kim



Jesper G. Poulsen (30-01-2005)
Kommentar
Fra : Jesper G. Poulsen


Dato : 30-01-05 11:58

Kim wrote:

> Hvad betyder HW ?

HW er en forkortelse for hardware (den del af PC'en som man skal sparke
til )


--
Med venlig hilsen
Jesper G. Poulsen - Linux Registered User #316493
- Look, this is Debian. They don’t release things until you have to
fire rockets at the thing to stop it working

Søg
Reklame
Statistik
Spørgsmål : 177558
Tips : 31968
Nyheder : 719565
Indlæg : 6408925
Brugere : 218888

Månedens bedste
Årets bedste
Sidste års bedste