On Tue, 22 Oct 2002 14:20:55 +0200, o&u <johnknuhtsen@mail.dk> wrote:
>On Tue, 22 Oct 2002 07:14:43 +0200, CBEDB <> wrote:
>
>>Den 18-9-02 skiftede jeg ud til P4 2.4 Ghz. på Epox E4BEAR med
>>raidcontroller og pc 2700 ram. Bundkortet kan i midlertid kun tage pc
>>2100. Jeg opdatede bios med den nyeste fra Epox uden at det hjalp,
>>selv om der står at det er fikset. Jeg har haft kontakt til Epox som
>>siger at de officielle specifikationer er pc 2100 og at de ikke kan
>>gøre mere. Forhamdleren HKAUTOMATION vil ikke tage det tilbage, så nu
>>sidder jeg med pc 2700 der kører som pc 2100 og det er surt
>
>Hvad er det for noget piv ?
>
>
http://www.explosivelabs.com/reviews/i845e_part1/
>
>De er da meget begejstrede:
>
>As for overclocking, the 4BEAR came with rich features, and there is a
>lot to say about the it. This board is "AWESOME!," is probably the
>best way to put it. This motherboard can go from 90MHz-200MHz FSB.
>Not only that you can fix the AGP and PCI clocks to they don't change.
>This is great if you don't want to sacrifice the stability of PCI and
>AGP cards for performance. Though, the memory voltage must be changed
>by jumpers; AGP voltage and Core voltage settings can be edited in the
>BIOS. The AGP voltage can be set from 1.5v to 1.9v in 0.1
>increments. The CPU/Core voltage can be set from 1.4v to 1.85v in .025
>increments. The thing I still can't get over is locking the PCI and
>AGP clocks to the normal frequency. In all, this is a sweet
>motherboard for overclocking. While it doesn't have it all, the 4BEAR
>is close to it.
>
>
>Er det ikke bare dig, der ikke kan finde rundt i bios ?
>
>En anden link:
>
>
http://www.digit-life.com/articles2/roundupmobo/roundup-i845e-oct2k2-mx.html
>
>Men jeg har ikke selv bundkortet.
>
>Noget andet du kan prøve er, at gå ind i forum på
www.ocworkbench.com
>, vælg epox i højre side.
>
>mvh
>
>John
Det hjalp ikke det med batteriet