Michael Rasmussen skrev:
> Dit problem må ligge i USB-porten. Er den aktiveret i BIOS. Kan du
> 'se' USB-porten i 'Enhedshåndtering' ?
Der står usb controller derinde, og jeg bruger en af de 2 usb porte jeg
har til min printer.
Kommer USB.musen frem i
> 'Enhedshåndtering' når du tilslutter den ?
Nej
>Kan muse-driveren 'se' USB-musen.
Njae det er sådan en tvivlsom driver (program)som man faktisk ikke kan
stille noget i, kun om det skal være 5 eller 3 knaps, og hvor meget den
skal rulle.
Jeg sender lige manualen med, jeg er ikke selv for skrap til den
engelske.
2. Hardware Installation
2-1. Install the Receiver with a USB Connector
You can turn on the PC before connecting the USB connector.
Plug the USB connector of the receiver into the USB port of the PC.
2-2. Install the Receiver with a USB to PS/2 Combo Connector
The combo connector is a USB connector with a USB to PS/2 adaptor.
Please check the mouse port of your PC. If the mouse port of the PC is
USB, then plug the USB connector to the PC without using the USB to PS/2
adaptor.
If the mouse port of the PC is PS/2, turn off the PC. Then connect the
USB connector with the USB to PS/2 adaptor, and then connect the
receiver to the PC.
2-3. Select the Channel
The two-channel switch is located at the back of the mouse or inside the
battery case. Select either Channel "1" or "2".
Place the batteries into the battery compartment.
Note: There is a channel selector at the back of the receiver for some
models. If the receiver has the channel selector, please select the same
number as the mouse.
2-4. Link the Mouse with the Receiver (Synchronization)
Turn on the PC. The LED indicator on the receiver will light.
Press the ID Link Button on the receiver and the LED indicator will
blink. The receiver is ready to automatically link (synchronize) with
the mouse.
Press the ID Link Button at the back of the mouse and the LED indicator
on the receiver will blink quickly. The indicator will light steadily
when the synchronization is successful.
The LED indicator will blink whenever you move the mouse.
If you need to re-link (synchronize) the mouse or after changing the
mouse batteries, please repeat the above synchronization instructions.
If the selected channel is interfered by other wireless-mouse users
nearby, please change the Link ID by re-linkage (re-synchronize) or
select another channel immediately.
--
Mvh
Henning Lund
icq 18805021
http://sitecenter.dk/freespace/ hl@lite.dk