Jeg flyttede bare nogle filer over på cd fra min harddisk skal der være
kryds i "Cache gem disk og netværks filer" der er kryds i Cache gem filer
mindre end 128kb ellers har jeg bare brugt de ting der er som standart min
gamle 2x brænder var der ik noget med
den gemmer sine filer på mit C drev IBM 30gb 7200 disk hvor skal jeg
definere cache-mappe på
harddisken
Hilsen Kim
"Christian Haugwitz" <christian@haugwitz.net> skrev i en meddelelse
news:gR4B6.34395$o4.2499885@news010.worldonline.dk...
> Den siger at du har strømningstab hvilket også kaldes buffer underrun, og
> den nævner noget om at du ikke har defineret en cache-mappe på harddisken.
>
> Nu ved jeg ikke hvad det er du skal brænde? den information ville hjælpe.
>
> VH
> Cristian Haugwitz
> MR <hanloven@forum.dk> skrev i en
> nyhedsmeddelelse:NHTA6.33025$o4.2342879@news010.worldonline.dk...
> > Hej
> >
> > Jeg har fået denne fejl to gange ved at over føre data til min brænder
> (acer
> > 10x) efter en ny installert windows ME hvad gør jeg forkert da jeg
prøvede
> > det sammen i Easy cd 5 gik det fint
> > igenen fejl den Nero jeg brugte (5024) fulgte med brænderen.
> >
> > KH
> > Kim Hansen
> > KH
> > 1500-4030-1157-0313-1505-4069*
> >
> > Windows 98 4.90
> > WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created
> > 08-06-2000 17:00:00
> > Nero Version: 5.0.2.4
> > Brænder: <ATAPI CD-R/RW 10X8X32> Version: 8.FZ - HA 1 TA
> 1 -
> > 5.0.2.4
> > Adapter driver: <ESDI_506> HA 1
> > Drive buffer : 4096kB
> > CD-ROM: <ASUS CD-S400/A> Version: 1.1C - HA 0 TA
> 1 -
> > 5.0.2.4
> > Adapter driver: <ESDI_506> HA 0
> > ASUS CD-S400/A (Target 1, F:): Autoinsert On, DMA Off, Disconnect ?,
> > SyncDataXfer ?
> > ATAPI CD-R/RW 10X8X32 (Target 1, G:): Autoinsert On, DMA Off, Disconnect
> ?,
> > SyncDataXfer ?
> > CmdQueuing : 1
> > CmdNotification: 2
> > WriteBufferSize: 34603008 (0) Byte
> > ShowDrvBufStat : 0
> > EraseSpeed : 0
> > BUFE : 0
> > Physical memory : 255MB (261560kB)
> > Free physical memory: 40MB (41280kB)
> > Memory in use : 54 %
> > Uncached PFiles: 0xFC
> > Wizard: On
> >
> > CD-ROM (ISO)
> > 10.4.2001
> >
> > 12:02:55 #1 Text 0 File BusArbiter.cpp, Line 84
> > bus arbitration: bus type category
> > SCSI 0
> > unknown 1
> > other 2
> > IDE 3
> > drives from category 1 and 3 competition level 1
> > stall writers at 95%, reactivate at 70%
> >
> > 12:02:55 #2 Text 0 File Reader.cpp, Line 75
> > Reader running
> >
> > 12:02:55 #3 ISO9660GEN -11 File geniso.cpp, Line 3236
> > First writeable address = 0 (0x00000000)
> >
> > 12:02:55 #4 Text 0 File Writer.cpp, Line 133
> > Writer ATAPI CD-R/RW 10X8X32 running
> >
> > 12:02:55 #5 Text 0 File BusArbiter.cpp, Line 827
> > Tue Apr 10 12:02:55 2001
> > ATAPI CD-R/RW 10X8X32: Register
> > arbitration enabled
> > n. category bus drive writer name
> > 0. 3 1 1 yes ATAPI CD-R/RW 10X8X32
> > i
> > r
> >
> > 12:02:55 #6 Text 0 File ThreadedTransferInterface.cpp, Line 637
> > Setup items (original item values)
> > 0: TRM_DATA_MODE1 (CTransferItem)
> > 2 indices, index0 (150) not provided
> > original CD pos #0 + 107446 (107446) = #107446
> > relocatable, CD pos for caching/writing not required/required, no
> patch
> > infos
> > --------------------------------------------------------------
> >
> > 12:02:59 #7 Text 0 File Burncd.cpp, Line 1527
> > Recorder: ATAPI CD-R/RW 10X8X32;
> > CDR code: 00 97 27 01; CD manufacturer: DIGITAL STORAGE TECHNOLOGY
> > CO.,LTD
> >
> > 12:02:59 #8 Text 0 File ThreadedTransferInterface.cpp, Line 769
> > Prepare recorder ATAPI CD-R/RW 10X8X32 for write in TAO
> > DAO infos:
> > ==========
> > MCN:
> > TOCTYPE: 0x0 Close Session
> > Tracks 1 to 1:
> > TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 220356608
> >
> > 12:02:59 #9 Text 0 File ThreadedTransferInterface.cpp, Line 797
> > Removed 2 run-out blocks from end of track 1.
> >
> > 12:02:59 #10 Text 0 File ThreadedTransferInterface.cpp, Line 637
> > Setup items (after recorder preparation)
> > 0: TRM_DATA_MODE1 (CTransferItem)
> > 2 indices, index0 (150) not provided
> > original CD pos #0 + 107446 (107446) = #107446
> > relocatable, CD pos for caching/writing not required/required, no
> patch
> > infos
> > -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
> > 107444 blocks [ATAPI CD-R/RW 10X8X32]
> > --------------------------------------------------------------
> >
> > 12:02:59 #11 Phase 24 File dlgbrnst.cpp, Line 1163
> > Fil-caching påbegyndt
> >
> > 12:02:59 #12 Phase 25 File dlgbrnst.cpp, Line 1163
> > Fil-caching udført
> >
> > 12:02:59 #13 Phase 36 File dlgbrnst.cpp, Line 1163
> > Brændingsproces påbegyndt ved 10x (1500 KB/s)
> >
> > 12:02:59 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1711
> > Verifying CD position of item 0 (relocatable, CD pos, no patch infos,
> orig
> > at #0): write at #0
> >
> > 12:02:59 #15 Text 0 File BusArbiter.cpp, Line 827
> > Tue Apr 10 12:02:59 2001
> > READ: Register
> > arbitration enabled
> > n. category bus drive writer name
> > 0. 3 1 1 yes ATAPI CD-R/RW 10X8X32
> > 1. 1 -1 -1 no READ
> > i i
> > r r
> >
> > 12:05:41 #16 SCSI -1013 File Cdrdrv.cpp, Line 1337
> > SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x02828D3C
> > Status: 0x04 (0x01, SCSI_ERR)
> > HA-Status 0x00 (0x00, OK)
> > TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
> > Sense Key: 0x03 (KEY_MEDIUM_ERROR)
> > Sense Code: 0x0C
> > Sense Qual: 0x09
> > CDB Data: 0x2A 0x00 0x00 0x01 0x75 0x02 0x00 0x00 0x1E 0x00 0x00 0x00
> > Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
> > 0x00 0x00 0x00 0x00 0x0C 0x09
> >
> > 12:05:41 #17 mmc 3081 File Writer.cpp, Line 313
> > Skrivefejl, strømningstab
> >
> > 12:05:41 #18 Text 0 File ThreadedTransfer.cpp, Line 211
> > all writers idle, stopping conversion
> >
> > 12:05:41 #19 Text 0 File ThreadedTransfer.cpp, Line 205
> > conversion idle, stopping reader
> >
> > 12:05:41 #20 CDR -201 File WriterStatus.cpp, Line 155
> > Ugyldig skrivestatus
> >
> > 12:05:41 #21 TRANSFER -18 File WriterStatus.cpp, Line 155
> > Kunne ikke udføre EndTrack
> >
> > 12:06:22 #22 Phase 38 File dlgbrnst.cpp, Line 1163
> > Brændingsproces slog fejl ved 10x (1500 KB/s)
> >
> > 12:06:22 #23 Text 0 File Scsicmd.cpp, Line 275
> > SCSI not using temporary buffers
> >
> > 12:06:22 #24 Text 0 File Scsicmd.cpp, Line 298
> > 10 out of 10 temporary buffers allocated
> >
> > 12:06:22 #25 Text 0 File WinNeroThreads.cpp, Line 909
> > Thread priorities:
> > Pri. name -> class / level
> > 0. Idle -> 32 / -15 = default
> > 1. Background -> 32 / -2 = default
> > 2. Normal -> 32 / 0 = default
> > 3. HighIdle -> 128 / -1 = default
> > 4. High -> 128 / 0 = default
> > 5. Higher -> 128 / 1 = default
> > 6. Realtime -> 128 / 2 = default
> >
> >
> > Existing drivers:
> > File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created
> > 08-06-2000 17:00:00
> > File 'IoSubsys\NEROCD95.VXD': Ver=4, 0, 0, 8, size=30887 bytes, created
> > 25-04-2000 16:52:56
> > File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created
> > 08-06-2000 17:00:00
> > File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created
> > 08-06-2000 17:00:00
> >
> >
> >
> >
> >
>
>