Egentlig er jeg lidt flov over at stille min uvidenhed til skue her, idet
jeg efter at have anskaffet mig et nyt bundkort (noget tid tilbage), ville
lukke en masse unødvendige funktioner ned i bios, dvs. at jeg desværre også
fik fjernet muligheden for at windows lukker computeren ned.
Efter systematisk at have gennemgået bios instillingerne viste det sig, at
en rep/geninstallering (SOLTEK support) var nødvendig for at genetablere
denne funktion.
Rejustering af bios var åbenbart ikke nok.
PS. læs nedefra og op.
Med venlig hilsen
Flemming M. Hansen
Kbh. NV.
Dear Flemming,
We are very glad to hear that your problem is solved
We hope you will
always enjoy our products. Of course, your any questions are welcome.
Thank you and have a good day!
Best regards,
Lydia / SOLTEK
TEL:886-2-26429060
FAX:886-2-26429065
Email: lydia@soltek.com.tw
Web Site:
http://www.soltek.com.tw
----- Original Message -----
From: Flemming Michael Hansen
To: lydia
Sent: Wednesday, November 13, 2002 4:19 AM
Subject: Re: Soltek 75 DRV 4. with bios rev. K4.1
You are the best Lydia - now I know what ACPI means - I will newer again do
some adjustment, I don't know anything about.
And of cource - it works now
And by the way, this motherboard is a god produkt, nearly as god as your
support.
Very best regards
Flemming
----- Original Message -----
From: lydia
To: sokker@hansen.mail.dk
Cc: larry ; Tom ; tommy ; axel
Sent: Tuesday, November 12, 2002 6:21 AM
Subject: Re: Soltek 75 DRV 4. with bios rev. K4.1
Lydia / SOLTEK
TEL:886-2-26429060
FAX:886-2-26429065
Email: lydia@soltek.com.tw
Web Site:
http://www.soltek.com.tw
----- Original Message -----
From: lydia
To: Soltek/Ring
Sent: Monday, November 11, 2002 9:48 AM
Subject: Re: Soltek 75 DRV 4. with bios rev. K4.1
Dear Flemming,
Thank you for contacting Soltek.
Please follow the steps below to reinstall your system:
1. Enter BIOS --> Power Management Setup --> ACPI Function: Enable.
2. Reinstall Win 2000.
3. Select 'Upgrade' for the installation.
4. It will detect a "previous version of Windows' and ask if you want to
repair it. Hit 'R' for repair. (Make sure you do NOT enter the recovery
console)
5. It will copy some files. When done, it'll want to reboot.
6. After a few minutes, it will detect a 'Previous version of Windows'.
Hit 'R' for repair again. You will see the screens of Windows set-up.
7. When finished, please try out the shutdown function.
Best regards,
Lydia / SOLTEK
TEL:886-2-26429060
FAX:886-2-26429065
Email: lydia@soltek.com.tw
Web Site:
http://www.soltek.com.tw
----- Original Message -----
From: Soltek/Ring
To: lydia
Sent: Monday, November 11, 2002 8:36 AM
Subject: Fw: Soltek 75 DRV 4. with bios rev. K4.1
Best Regards.
Ring Lo
SOLTEK Computer Inc.
Tel:886-2-26429060
Fax:886-2-26429065
E-mail: ringlo@soltek.com.tw
Web site:
http://www.soltek.com.tw
----- Original Message -----
From: Flemming Michael Hansen
To: support@soltek.com.tw
Sent: Friday, November 08, 2002 7:15 PM
Subject: Soltek 75 DRV 4. with bios rev. K4.1
I have a Soltek 75 DRV 4. with "opdated" bios rev. K4.1
After few times use it now acts like a AT motherboard.
After windows 98 is shutting down windows tells me to turn of like the older
AT motherbords.
I just installed windows 2000, it also se my motherboard like a old AT
board.
Whats wrong?
Should i deliver it back to the store for repair?
Have i done a wrong biosajustment?
Regards
Flemming M. Hansen
Denmark (DK)