Prøv med :
mount /dev/cdrom !!!
/ Steffen
"Henrik Mønster" <nina.henrik@mobilixnet.dk> skrev i en meddelelse
news:anmvuk$r53$1@sunsite.dk...
> Hejsa
>
> Efter at have installeret SME server 5.5 og opdateret med Update 2, kan
jeg
> ikke mounte mit cdromdrev. Det virkede før installationen
Jeg kørte
> opdateringen som beskrevet i vejledningen.
>
> Her er hvad der sker:
>
> mount /mnt/cdrom
> mount: wrong fs type, bad option, bad superblock on /dev/cdrom,
> or too many mounted file systems
>
> /dev/cdrom peger på hdc med i logfilen herunder nævnes cdromdrevet som st0
> eller noget i den stil.
>
> Er der en der kan sige hvad der er sket? evt. link til løsning på
problemet
>
>
> M.v.h. Henrik - Linuxamatør
>
>
> Systeminfo:
>
> Systemet har to ide-diske som SME selv har konfigureret til raid1, en
> adaptec 2940 scsi adapter med en HP Surestore T4 tape streamer.
>
> fstab:
> /dev/cdrom /mnt/cdrom iso9660 noauto,owner,ro 0
0
>
> dmesg:
> Linux version 2.2.19-7.0.8 (root@porky.devel.redhat.com) (gcc version
> egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Thu Jun 21 06:28:56
EDT
> 2001
> BIOS-provided physical RAM map:
> BIOS-e820: 0009f000 @ 00000000 (usable)
> BIOS-e820: 0fefd8c0 @ 00100000 (usable)
> Detected 348489 kHz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 694.68 BogoMIPS
> Memory: 257232k/262132k available (1072k kernel code, 412k reserved, 3024k
> data, 72k init, 0k bigmem)
> Dentry hash table entries: 32768 (order 6, 256k)
> Buffer cache hash table entries: 262144 (order 8, 1024k)
> Page cache hash table entries: 65536 (order 6, 256k)
> VFS: Diskquotas version dquot_6.4.0 initialized
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> 512K L2 cache (4 way)
> CPU: L2 Cache: 512K
> CPU: Intel Pentium II (Deschutes) stepping 01
> Enabling fast FPU save and restore... done.
> Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
> PCI: PCI BIOS revision 2.10 entry at 0xfd83c
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> Linux NET4.0 for Linux 2.2
> Based upon Swansea University Computer Society NET3.039
> NET4: Unix domain sockets 1.0 for Linux NET4.0.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> TCP: Hash tables configured (ehash 262144 bhash 65536)
> IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
> Linux IP multicast router 0.06 plus PIM-SM
> Initializing RT netlink socket
> Starting kswapd v 1.5
> Detected PS/2 Mouse Port.
> Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> pty: 256 Unix98 ptys configured
> Real Time Clock Driver v1.09
> RAM disk driver initialized: 16 RAM disks of 4096K size
> PIIX4: IDE controller on PCI bus 00 dev 11
> PIIX4: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hda:DMA, hdb:DMA
> ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdc:pio, hdd:pio
> hda: FUJITSU MPF3153AH BA, ATA DISK drive
> hdb: FUJITSU MPD3137AH B6, ATA DISK drive
> hdc: CRD-8322B, ATAPI CDROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: FUJITSU MPF3153AH BA, 14660MB w/2048kB Cache, CHS=1868/255/63
> hdb: FUJITSU MPD3137AH B6, 12949MB w/512kB Cache, CHS=1650/255/63
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
> raid5: measuring checksumming speed
> raid5: MMX detected, trying high-speed MMX checksum routines
> pII_mmx : 780.288 MB/sec
> p5_mmx : 814.959 MB/sec
> 8regs : 598.551 MB/sec
> 32regs : 352.044 MB/sec
> using fastest function: p5_mmx (814.959 MB/sec)
> scsi : 0 hosts.
> scsi : detected total.
> md.c: sizeof(mdp_super_t) = 4096
> Partition check:
> hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
> hdb: hdb1
> RAMDISK: Compressed image found at block 0
> autodetecting RAID arrays
> (read) hda1's sb offset: 264960 [events: 0000000a]
> (read) hda5's sb offset: 264960 [events: 0000000a]
> (read) hda6's sb offset: 15936 [events: 0000000a]
> (read) hda7's sb offset: 15936 [events: 0000000a]
> (read) hda8's sb offset: 7229120 [events: 00000003]
> (read) hdb1's sb offset: 7221120 [events: 0000000b]
> autorun ...
> considering hdb1 ...
> adding hdb1 ...
> adding hda8 ...
> created md1
> bind<hda8,1>
> bind<hdb1,2>
> running: <hdb1><hda8>
> now!
> hdb1's event counter: 0000000b
> hda8's event counter: 00000003
> md: superblock update time inconsistency -- using the most recent one
> freshest: hdb1
> md: kicking non-fresh hda8 from array!
> unbind<hda8,1>
> export_rdev(hda8)
> request_module[md-personality-3]: Root fs not mounted
> do_md_run() returned -22
> unbind<hdb1,0>
> export_rdev(hdb1)
> md1 stopped.
> considering hda7 ...
> adding hda7 ...
> adding hda6 ...
> created md0
> bind<hda6,1>
> md0: WARNING: hda7 appears to be on the same physical disk as hda6. True
> protection against single-disk failure might be compromised.
> bind<hda7,2>
> running: <hda7><hda6>
> now!
> hda7's event counter: 0000000a
> hda6's event counter: 0000000a
> request_module[md-personality-3]: Root fs not mounted
> do_md_run() returned -22
> unbind<hda7,1>
> export_rdev(hda7)
> unbind<hda6,0>
> export_rdev(hda6)
> md0 stopped.
> considering hda5 ...
> adding hda5 ...
> adding hda1 ...
> created md2
> bind<hda1,1>
> md2: WARNING: hda5 appears to be on the same physical disk as hda1. True
> protection against single-disk failure might be compromised.
> bind<hda5,2>
> running: <hda5><hda1>
> now!
> hda5's event counter: 0000000a
> hda1's event counter: 0000000a
> request_module[md-personality-3]: Root fs not mounted
> do_md_run() returned -22
> unbind<hda5,1>
> export_rdev(hda5)
> unbind<hda1,0>
> export_rdev(hda1)
> md2 stopped.
> ... autorun DONE.
> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13)
> VFS: Mounted root (ext2 filesystem).
> (scsi0) <Adaptec AHA-294X Ultra SCSI host adapter> found at PCI 0/18/0
> (scsi0) Narrow Channel, SCSI ID=7, 16/255 SCBs
> (scsi0) Cables present (Int-50 YES, Ext-50 NO)
> (scsi0) Downloading sequencer code... 422 instructions downloaded
> scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.33/3.2.4
> <Adaptec AHA-294X Ultra SCSI host adapter>
> scsi : 1 host.
> Vendor: HP Model: T4000s Rev: 1.08
> Type: Sequential-Access ANSI SCSI revision: 02
> raid1 personality registered
> autodetecting RAID arrays
> (read) hda1's sb offset: 264960 [events: 0000000a]
> (read) hda5's sb offset: 264960 [events: 0000000a]
> (read) hda6's sb offset: 15936 [events: 0000000a]
> (read) hda7's sb offset: 15936 [events: 0000000a]
> (read) hda8's sb offset: 7229120 [events: 00000003]
> (read) hdb1's sb offset: 7221120 [events: 0000000b]
> autorun ...
> considering hdb1 ...
> adding hdb1 ...
> adding hda8 ...
> created md1
> bind<hda8,1>
> bind<hdb1,2>
> running: <hdb1><hda8>
> now!
> hdb1's event counter: 0000000b
> hda8's event counter: 00000003
> md: superblock update time inconsistency -- using the most recent one
> freshest: hdb1
> md: kicking non-fresh hda8 from array!
> unbind<hda8,1>
> export_rdev(hda8)
> md1: max total readahead window set to 128k
> md1: 1 data-disks, max readahead per data-disk: 128k
> raid1: device hdb1 operational as mirror 1
> raid1: md1, not all disks are operational -- trying to recover array
> raid1: raid set md1 active with 1 out of 2 mirrors
> md: updating md1 RAID superblock on device
> hdb1 [events: 0000000c](write) hdb1's sb offset: 7221120
> md: recovery thread got woken up ...
> md1: no spare disk to reconstruct array! -- continuing in degraded mode
> md: recovery thread finished ...
> .
> considering hda7 ...
> adding hda7 ...
> adding hda6 ...
> created md0
> bind<hda6,1>
> md0: WARNING: hda7 appears to be on the same physical disk as hda6. True
> protection against single-disk failure might be compromised.
> bind<hda7,2>
> running: <hda7><hda6>
> now!
> hda7's event counter: 0000000a
> hda6's event counter: 0000000a
> md0: max total readahead window set to 128k
> md0: 1 data-disks, max readahead per data-disk: 128k
> raid1: device hda7 operational as mirror 1
> raid1: device hda6 operational as mirror 0
> (checking disk 0)
> (really checking disk 0)
> (checking disk 1)
> (really checking disk 1)
> (checking disk 2)
> (checking disk 3)
> (checking disk 4)
> (checking disk 5)
> (checking disk 6)
> (checking disk 7)
> (checking disk 8)
> (checking disk 9)
> (checking disk 10)
> (checking disk 11)
> raid1: raid set md0 active with 2 out of 2 mirrors
> md: updating md0 RAID superblock on device
> hda7 [events: 0000000b](write) hda7's sb offset: 15936
> hda6 [events: 0000000b](write) hda6's sb offset: 15936
> .
> considering hda5 ...
> adding hda5 ...
> adding hda1 ...
> created md2
> bind<hda1,1>
> md2: WARNING: hda5 appears to be on the same physical disk as hda1. True
> protection against single-disk failure might be compromised.
> bind<hda5,2>
> running: <hda5><hda1>
> now!
> hda5's event counter: 0000000a
> hda1's event counter: 0000000a
> md2: max total readahead window set to 128k
> md2: 1 data-disks, max readahead per data-disk: 128k
> raid1: device hda5 operational as mirror 1
> raid1: device hda1 operational as mirror 0
> (checking disk 0)
> (really checking disk 0)
> (checking disk 1)
> (really checking disk 1)
> (checking disk 2)
> (checking disk 3)
> (checking disk 4)
> (checking disk 5)
> (checking disk 6)
> (checking disk 7)
> (checking disk 8)
> (checking disk 9)
> (checking disk 10)
> (checking disk 11)
> raid1: raid set md2 active with 2 out of 2 mirrors
> md: updating md2 RAID superblock on device
> hda5 [events: 0000000b](write) hda5's sb offset: 264960
> hda1 [events: 0000000b](write) hda1's sb offset: 264960
> .
> ... autorun DONE.
> VFS: Mounted root (ext2 filesystem) readonly.
> change_root: old root has d_count=1
> Freeing unused kernel memory: 72k freed
> Adding Swap: 264952k swap-space (priority -1)
> usb.c: registered new driver usbdevfs
> usb.c: registered new driver hub
> usb-uhci.c: $Revision: 1.237 $ time 06:33:18 Jun 21 2001
> usb-uhci.c: High bandwidth mode enabled
> usb-uhci.c: USB UHCI at I/O 0xff00, IRQ 11
> usb-uhci.c: Detected 2 ports
> usb.c: new USB bus registered, assigned bus number 1
> usb.c: USB new device connect, assigned device number 1
> hub.c: USB hub found
> hub.c: 2 ports detected
> scsi1 : SCSI host adapter emulation for IDE ATAPI devices
> scsi : 2 hosts.
> Vendor: LG Model: CD-ROM CRD-8322B Rev: 1.06
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
> sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.11
> st: bufsize 32768, wrt 30720, max buffers 5, s/g segs 16.
> Detected scsi tape st0 at scsi0, channel 0, id 3, lun 0
>
>
> Jeg har ikke pillet ved andet
>
>