/ Forside / Teknologi / Operativsystemer / Linux / Nyhedsindlæg
Login
Glemt dit kodeord?
Brugernavn

Kodeord


Reklame
Top 10 brugere
Linux
#NavnPoint
o.v.n. 11177
peque 7911
dk 4814
e.c 2359
Uranus 1334
emesen 1334
stone47 1307
linuxrules 1214
Octon 1100
10  BjarneD 875
Mail problemer med exim
Fra : Heine Laursen


Dato : 28-09-02 15:06

Hejsa

Jeg har konfigureret exim efter gnuskolens eksempel på
http://http://www.gnuskole.dk/bog/exim.html

Men jeg kan knagme ikke få hul igennem. Hver gang jeg sender en mail til en
bruger, så får jeg en sød mail fra TDC som skriver:

The Postfix program

<heine@gozar.dynu.com>: host mail.gozar.dynu.com[131.164.146.96] said: 550
relaying to <heine@gozar.dynu.com> prohibited by administrator

Hvad skal jeg ændre i exim.conf for at brugeren heine må modtage mail??

Og så et side spørgesmål. Hvordan konfigureres imap?
Jeg kan saktens få forbindelse til imap via et post program, men det ser ud
som om den viser brugerens home dir!!

--
Mvh
Heine Laursen

 
 
Gunner Poulsen (29-09-2002)
Kommentar
Fra : Gunner Poulsen


Dato : 29-09-02 01:21

Heine Laursen skrev:
> Hejsa
>
> Jeg har konfigureret exim efter gnuskolens eksempel på
> http://http://www.gnuskole.dk/bog/exim.html
>
> Men jeg kan knagme ikke få hul igennem. Hver gang jeg sender en mail til en
> bruger, så får jeg en sød mail fra TDC som skriver:
>
> The Postfix program
>
> <heine@gozar.dynu.com>: host mail.gozar.dynu.com[131.164.146.96] said: 550
> relaying to <heine@gozar.dynu.com> prohibited by administrator
>
> Hvad skal jeg ændre i exim.conf for at brugeren heine må modtage mail??

Det er svært at se når man ikke kan se din conf-fil.

>
> Og så et side spørgesmål. Hvordan konfigureres imap?
> Jeg kan saktens få forbindelse til imap via et post program, men det ser ud
> som om den viser brugerens home dir!!
>

Det problem har jeg personligt oplevet før.
Jeg kender ikke løsningen. Er det alle klienter?

Gunner.


Heine Laursen (29-09-2002)
Kommentar
Fra : Heine Laursen


Dato : 29-09-02 22:29

Gunner Poulsen <gp@lyngbjerggaardskolen.dk> wrote in
news:3d964772$0$84685$edfadb0f@dspool01.news.tele.dk:

> Heine Laursen skrev:
>> Hejsa
>>
>> Jeg har konfigureret exim efter gnuskolens eksempel på
>> http://http://www.gnuskole.dk/bog/exim.html
>>
>> Men jeg kan knagme ikke få hul igennem. Hver gang jeg sender en mail
>> til en bruger, så får jeg en sød mail fra TDC som skriver:
>>
>> The Postfix program
>>
>> <heine@gozar.dynu.com>: host mail.gozar.dynu.com[131.164.146.96]
>> said: 550
>> relaying to <heine@gozar.dynu.com> prohibited by administrator
>>
>> Hvad skal jeg ændre i exim.conf for at brugeren heine må modtage
>> mail??
>
> Det er svært at se når man ikke kan se din conf-fil.


Den ser såmænd sådan her ud:

# This is the main exim configuration file.
# It was originally generated by `eximconfig', part of the exim package
# distributed with Debian, but it may edited by the mail system
administrator.
# This file originally generated by eximconfig at Wed Aug 14 17:24:58 CEST
2002
# See exim info section for details of the things that can be configured
here.

# Please see the manual for a complete list
# of all the runtime configuration options that can be included in a
# configuration file.

# This file is divided into several parts, all but the last of which are
# terminated by a line containing the word "end". The parts must appear
# in the correct order, and all must be present (even if some of them are
# in fact empty). Blank lines, and lines starting with # are ignored.

######################################################################
# MAIN CONFIGURATION SETTINGS #
######################################################################

# Specify the domain you want to be added to all unqualified addresses
# here. Unqualified addresses are accepted only from local callers by
# default. See the receiver_unqualified_{hosts,nets} options if you want
# to permit unqualified addresses from remote sources. If this option is
# not set, the primary_hostname value is used for qualification.

qualify_domain = gozar.dynu.com

# If you want unqualified recipient addresses to be qualified with a
different
# domain to unqualified sender addresses, specify the recipient domain
here.
# If this option is not set, the qualify_domain value is used.

qualify_recipient = *

# Specify your local domains as a colon-separated list here. If this option
# is not set (i.e. not mentioned in the configuration file), the
# qualify_recipient value is used as the only local domain. If you do not
want
# to do any local deliveries, uncomment the following line, but do not
supply
# any data for it. This sets local_domains to an empty string, which is not
# the same as not mentioning it at all. An empty string specifies that
there
# are no local domains; not setting it at all causes the default value (the
# setting of qualify_recipient) to be used.

local_domains = localhost:debian
# Allow mail addressed to our hostname, or to our IP address.

local_domains_include_host = true
local_domains_include_host_literals = true

# Domains we relay for; that is domains that aren't considered local but we
# accept mail for them.

#relay_domains =

# If this is uncommented, we accept and relay mail for all domains we are
# in the DNS as an MX for.

relay_domains_include_local_mx = true

# No local deliveries will ever be run under the uids of these users (a
colon-
# separated list). An attempt to do so gets changed so that it runs under
the
# uid of "nobody" instead. This is a paranoic safety catch. Note the
default
# setting means you cannot deliver mail addressed to root as if it were a
# normal user. This isn't usually a problem, as most sites have an alias
for
# root that redirects such mail to a human administrator.

never_users = root

# The setting below causes Exim to do a reverse DNS lookup on all incoming
# IP calls, in order to get the true host name. If you feel this is too
# expensive, you can specify the networks for which a lookup is done, or
# remove the setting entirely.

host_lookup = *

# The setting below would, if uncommented, cause Exim to check the syntax
of
# all the headers that are supposed to contain email addresses (To:, From:,
# etc). This reduces the level of bounced bounces considerably.

# headers_check_syntax

# Exim contains support for the Realtime Blocking List (RBL), and the many
# similar services that are being maintained as part of the DNS. See
# http://www.mail-abuse.org/ for background. The line below, if
uncommented,
# will reject mail from hosts in the RBL, and add warning headers to mail
# from hosts in a list of dynamic-IP dialups. Note that MAPS may charge
# for this service.

#rbl_domains = rbl.mail-abuse.org/reject : dialups.mail-abuse.org/warn

# http://www.rfc-ignorant.org is another interesting site with a number of
# services you can use with the rbl_domains option

# The setting below allows your host to be used as a mail relay only by
# localhost: it locks out the use of your host as a mail relay by any
# other host. See the section of the manual entitled "Control of relaying"
# for more info.

host_accept_relay = 127.0.0.1 : 192.168.0.1 : 192.168.0.2 : 192.168.0.3 :
192.168.0.4 : backup-mx.post.tele.dk

# This setting allows anyone who has authenticated to use your host as a
# mail relay. To use this you will need to set up some authenticators at
# the end of the file

host_auth_accept_relay = *

# If you want Exim to support the "percent hack" for all your local
domains,
# uncomment the following line. This is the feature by which mail addressed
# to x%y@z (where z is one of your local domains) is locally rerouted to
# x@y and sent on. Otherwise x%y is treated as an ordinary local part

# percent_hack_domains=*

# If this option is set, then any process that is running as one of the
# listed users may pass a message to Exim and specify the sender's
# address using the "-f" command line option, without Exim's adding a
# "Sender" header.

trusted_users = mail

# If this option is true, the SMTP command VRFY is supported on incoming
# SMTP connections; otherwise it is not.

smtp_verify = true

# Some operating systems use the "gecos" field in the system password file
# to hold other information in addition to users' real names. Exim looks up
# this field when it is creating "sender" and "from" headers. If these
options
# are set, exim uses "gecos_pattern" to parse the gecos field, and then
# expands "gecos_name" as the user's name. $1 etc refer to sub-fields
matched
# by the pattern.

gecos_pattern = ^([^,:]*)
gecos_name = $1

# This sets the maximum number of messages that will be accepted in one
# connection and immediately delivered. If one connection sends more
# messages than this, any further ones are accepted and queued but not
# delivered. The default is 10, which is probably enough for most purposes,
# but is too low on dialup SMTP systems, which often have many more mails
# queued for them when they connect.

smtp_accept_queue_per_connection = 100

# Send a mail to the postmaster when a message is frozen. There are many
# reasons this could happen; one is if exim cannot deliver a mail with no
# return address (normally a bounce) another that may be common on dialup
# systems is if a DNS lookup of a smarthost fails. Read the documentation
# for more details: you might like to look at the auto_thaw option

freeze_tell_mailmaster = true

# This string defines the contents of the \`Received' message header that
# is added to each message, except for the timestamp, which is
automatically
# added on at the end, preceded by a semicolon. The string is expanded each
# time it is used.

received_header_text = "Received: \
${if def:sender_rcvhost {from ${sender_rcvhost}\n\t}\
{${if def:sender_ident {from ${sender_ident} }}\
${if def:sender_helo_name {(helo=${sender_helo_name})\n\t}}}}\
by ${primary_hostname} \
${if def:received_protocol {with ${received_protocol}}} \
(Exim ${version_number} #${compile_number} (Debian))\n\t\
id ${message_id}\
${if def:received_for {\n\tfor <$received_for>}}"

# Attempt to verify recipient address before receiving mail, so that mails
# to invalid addresses are rejected rather than accepted and then bounced.
# Apparently some spammers are abusing servers that accept and then bounce
# to send bounces containing their spam to people.

receiver_try_verify = true

# This would make exim advertise the 8BIT-MIME option. According to
# RFC1652, this means it will take an 8bit message, and ensure it gets
# delivered correctly. exim won't do this: it is entirely 8bit clean
# but won't do any conversion if the next hop isn't. Therefore, if you
# set this option you are asking exim to lie and not be RFC
# compliant. But some people want it.

#accept_8bitmime = true

# This will cause it to accept mail only from the local interface

#local_interfaces = 127.0.0.1

# If this next line is uncommented, any user can see the mail queue
# by using the mailq command or exim -bp.

#queue_list_requires_admin = false

#
end


######################################################################
# TRANSPORTS CONFIGURATION #
######################################################################
# ORDER DOES NOT MATTER #
# Only one appropriate transport is called for each delivery. #
######################################################################

# This transport is used for local delivery to user mailboxes. On debian
# systems group mail is used so we can write to the /var/spool/mail
# directory. (The alternative, which most other unixes use, is to deliver
# as the user's own group, into a sticky-bitted directory)

local_delivery:
driver = appendfile
group = mail
mode = 0660
mode_fail_narrower = false
envelope_to_add = true
return_path_add = true
file = /var/spool/mail/${local_part}

# This transport is used for handling pipe addresses generated by
# alias or .forward files. If the pipe generates any standard output,
# it is returned to the sender of the message as a delivery error. Set
# return_fail_output instead if you want this to happen only when the
# pipe fails to complete normally.

address_pipe:
driver = pipe
path = /usr/bin:/bin:/usr/local/bin
return_output

# This transport is used for handling file addresses generated by alias
# or .forward files.

address_file:
driver = appendfile
envelope_to_add = true
return_path_add = true

# This transport is used for handling file addresses generated by alias
# or .forward files if the path ends in "/", which causes it to be treated
# as a directory name rather than a file name. Each message is then
delivered
# to a unique file in the directory. If instead you want all such
deliveries to
# be in the "maildir" format that is used by some other mail software,
# uncomment the final option below. If this is done, the directory
specified
# in the .forward or alias file is the base maildir directory.
#
# Should you want to be able to specify either maildir or non-maildir
# directory-style deliveries, then you must set up yet another transport,
# called address_directory2. This is used if the path ends in "//" so
should
# be the one used for maildir, as the double slash suggests another level
# of directory. In the absence of address_directory2, paths ending in //
# are passed to address_directory.

address_directory:
driver = appendfile
no_from_hack
prefix = ""
suffix = ""
# maildir_format

# This transport is used for handling autoreplies generated by the
filtering
# option of the forwardfile director.

address_reply:
driver = autoreply

# This transport is used for procmail

procmail_pipe:
driver = pipe
command = "/usr/bin/procmail"
return_path_add
delivery_date_add
envelope_to_add
# check_string = "From "
# escape_string = ">From "
suffix = ""


# This transport is used for delivering messages over SMTP connections.

remote_smtp:
driver = smtp
authenticate_hosts = backup-mx.post.tele.dk

# To use SMTP AUTH when sending to a particular host, such as your ISP's
# smarthost, uncomment and edit the above line, and also the example
# client-side authenticators at the bottom of the file

end


######################################################################
# DIRECTORS CONFIGURATION #
# Specifies how local addresses are handled #
######################################################################
# ORDER DOES MATTER #
# A local address is passed to each in turn until it is accepted. #
######################################################################

# This allows local delivery to be forced, avoiding alias files and
# forwarding.

real_local:
prefix = real-
driver = localuser
transport = local_delivery

# This director handles aliasing using a traditional /etc/aliases file.
# If any of your aliases expand to pipes or files, you will need to set
# up a user and a group for these deliveries to run under. You can do
# this by uncommenting the "user" option below (changing the user name
# as appropriate) and adding a "group" option if necessary.

system_aliases:
driver = aliasfile
file_transport = address_file
pipe_transport = address_pipe
file = /etc/aliases
search_type = lsearch
# user = list
# Uncomment the above line if you are running smartlist


# This director handles forwarding using traditional .forward files.
# It also allows mail filtering when a forward file starts with the
# string "# Exim filter": to disable filtering, uncomment the "filter"
# option. The check_ancestor option means that if the forward file
# generates an address that is an ancestor of the current one, the
# current one gets passed on instead. This covers the case where A is
# aliased to B and B has a .forward file pointing to A.

# For standard debian setup of one group per user, it is acceptable---
normal
# even---for .forward to be group writable. If you have everyone in one
# group, you should comment out the "modemask" line. Without it, the exim
# default of 022 will apply, which is probably what you want.

userforward:
driver = forwardfile
file_transport = address_file
pipe_transport = address_pipe
reply_transport = address_reply
no_verify
check_ancestor
check_local_user
file = .forward
modemask = 002
filter

# This director runs procmail for users who have a .procmailrc file

procmail:
driver = localuser
transport = procmail_pipe
require_files =
${local_part}:+${home}:+${home}/.procmailrc:+/usr/bin/procmail
no_verify

# This director matches local user mailboxes.

localuser:
driver = localuser
transport = local_delivery

end


######################################################################
# ROUTERS CONFIGURATION #
# Specifies how remote addresses are handled #
######################################################################
# ORDER DOES MATTER #
# A remote address is passed to each in turn until it is accepted. #
######################################################################

# Remote addresses are those with a domain that does not match any item
# in the "local_domains" setting above.

# This router routes to remote hosts over SMTP using a DNS lookup with
# default options.

lookuphost:
driver = lookuphost
transport = remote_smtp

# This router routes to remote hosts over SMTP by explicit IP address,
# given as a "domain literal" in the form [nnn.nnn.nnn.nnn]. The RFCs
# require this facility, which is why it is enabled by default in Exim.
# If you want to lock it out, set forbid_domain_literals in the main
# configuration section above.

literal:
driver = ipliteral
transport = remote_smtp

end


######################################################################
# RETRY CONFIGURATION #
######################################################################

# This single retry rule applies to all domains and all errors. It
specifies
# retries every 15 minutes for 2 hours, then increasing retry intervals,
# starting at 2 hours and increasing each time by a factor of 1.5, up to 16
# hours, then retries every 8 hours until 4 days have passed since the
first
# failed delivery.

# Domain Error Retries
# ------ ----- -------

* * F,2h,15m; G,16h,2h,1.5; F,4d,8h

end


######################################################################
# REWRITE CONFIGURATION #
######################################################################


# There are no rewriting specifications in this default configuration file.


# This rewriting rule is particularly useful for dialup users who
# don't have their own domain, but could be useful for anyone.
# It looks up the real address of all local users in a file

*@debian ${lookup{$1}lsearch{/etc/email-addresses}\
                  {$value}fail} frFs

end

######################################################################
# AUTHENTICATION CONFIGURATION #
######################################################################

# Look in the documentation (in package exim-doc or exim-doc-html for
# information on how to set up authenticated connections.

# The examples below are for server side authentication; they allow two
# styles of plain-text authentication against an /etc/exim/passwd file
# which should have user IDs in the first column and crypted passwords
# in the second.

# plain:
# driver = plaintext
# public_name = PLAIN
# server_condition = "${if
crypteq{$2}{${extract{1}{:}{${lookup{$1}lsearch{/etc/exim/passwd}{$value}{*
:*}}}}}{1}{0}}"
# server_set_id = $1
#
# login:
# driver = plaintext
# public_name = LOGIN
# server_prompts = "Username:: : Password::"
# server_condition = "${if
crypteq{$2}{${extract{1}{:}{${lookup{$1}lsearch{/etc/exim/passwd}{$value}{*
:*}}}}}{1}{0}}"
# server_set_id = $1

# These examples below are the equivalent for client side authentication.
# They assume that you only use client side authentication to connect to
# one host (such as a smarthost at your ISP), or else use the same user
# name and password everywhere

# plain:
# driver = plaintext
# public_name = PLAIN
# client_send = "^username^password"
#
# login:
# driver = plaintext
# public_name = LOGIN
# client_send = ": username : password"
#
# cram_md5:
# driver = cram_md5
# public_name = CRAM-MD5
# client_name = username
# client_secret = password

# End of Exim configuration file


>>
>> Og så et side spørgesmål. Hvordan konfigureres imap?
>> Jeg kan saktens få forbindelse til imap via et post program, men det
>> ser ud som om den viser brugerens home dir!!
>>
>
> Det problem har jeg personligt oplevet før.
> Jeg kender ikke løsningen. Er det alle klienter?

Jeps.

--
Mvh
Heine Laursem

Rasmus Bøg Hansen (30-09-2002)
Kommentar
Fra : Rasmus Bøg Hansen


Dato : 30-09-02 07:37

Heine Laursen wrote:

>>> <heine@gozar.dynu.com>: host mail.gozar.dynu.com[131.164.146.96]
>>> said: 550
>>> relaying to <heine@gozar.dynu.com> prohibited by administrator

> # This is the main exim configuration file.

> local_domains = localhost:debian

Du har jo ikke sat den til at modtage post til dit domæne:

local_domains = localhost:debian:gozar.dynu.com

/Rasmus

--
-- [ Rasmus "Møffe" Bøg Hansen ] ---------------------------------------
Mommy, mommy! The garbage man is here!
Well, tell him we don't want any!
-- Groucho Marx
----------------------------------[ moffe at amagerkollegiet dot dk ] --

Heine Laursen (30-09-2002)
Kommentar
Fra : Heine Laursen


Dato : 30-09-02 10:40

Rasmus Bøg Hansen <moffe47@hotmail.com> wrote in
news:an8rdg$s9i$4@carlsberg.amagerkollegiet.dk:

> Heine Laursen wrote:
>
>>>> <heine@gozar.dynu.com>: host mail.gozar.dynu.com[131.164.146.96]
>>>> said: 550
>>>> relaying to <heine@gozar.dynu.com> prohibited by administrator
>
>> # This is the main exim configuration file.
>
>> local_domains = localhost:debian

Ahh. Det viste jeg ikke jeg skulde.

Tak for det.

--
Mvh
Heine Laursen

Heine Laursen (30-09-2002)
Kommentar
Fra : Heine Laursen


Dato : 30-09-02 10:52

Heine Laursen <gozar@myrealbox.com> wrote in news:an965r$23q$1@sunsite.dk:

>>> # This is the main exim configuration file.
>>
>>> local_domains = localhost:debian

Jubii. Det virker sq også. mange tak for hjælpen.

Søg
Reklame
Statistik
Spørgsmål : 177557
Tips : 31968
Nyheder : 719565
Indlæg : 6408877
Brugere : 218888

Månedens bedste
Årets bedste
Sidste års bedste