---

Hej

Jeg er i fuld gang med at migrere over til Linux, men der er en ting jeg
ikke kan få til at virke, nemlig min Nex II mp3 afspiller. Ifølge diverse
hjemmesider, burde den connecte som et almindeligt usb mass storage device.
Problemet er, at jeg sagtens kan finde afspilleren, men der rapporteres en
størrelse på 0 mb.

Hvordan kan det være ??

Mvh Kim


Beskeder fra systemet:

tail -f /var/log/messages

Jul 6 11:07:26 kim kernel: Vendor: FL Model: Nex II Digital
Rev: 0001
Jul 6 11:07:26 kim kernel: Type: Direct-Access
ANSI SCSI revision: 02
Jul 6 11:07:26 kim kernel: USB Mass Storage support registered.
Jul 6 11:12:07 kim kernel: Attached scsi removable disk sda at scsi1,
channel 0, id 0, lun 0
Jul 6 11:12:07 kim kernel: SCSI device sda: -1 512-byte hdwr sectors (0 MB)
Jul 6 11:12:07 kim kernel: usb-uhci.c: interrupt, status 3, frame# 2000
Jul 6 11:12:07 kim kernel: sda: test WP failed, assume Write Enabled
Jul 6 11:12:07 kim kernel: sda: sda1
Jul 6 11:12:07 kim kernel: usb-uhci.c: interrupt, status 3, frame# 44
Jul 6 11:13:07 kim kernel: usb-uhci.c: interrupt, status 3, frame# 628


cat /proc/scsi/scsi

Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: HP Model: CD-Writer+ 9100 Rev: 1.0c
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: FL Model: Nex II Digital Rev: 0001
Type: Direct-Access ANSI SCS


cat /proc/bus/usb/devices

T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=d800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc=118/900 us (13%), #Int= 1, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c001 Rev= 4.01
S: Manufacturer=Logitech
S: Product=N48
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 26mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl= 10ms