Det hjalp en del at få tilføjet "noauto" delen, men jeg får stadig denne
fejl:
mount_cd9660: /dev/cd1a on /mnt: Device not configured
Jeg har vedlagt min dmesg, herunder så du kan se hvad der er der
DMESG:
OpenBSD 3.1-current (TOSHIBA) #6: Sun Apr 21 18:37:34 CEST 2002
ily@labtop:/usr/src/sys/arch/i386/compile/TOSHIBA
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 233 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 100184064 (97836K)
avail mem = 89681920 (87580K)
using 1248 buffers containing 5111808 bytes (4992K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(63) BIOS, date 02/17/99, BIOS32 rev. 0 @ 0xfc240
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf0f80/96 (4 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB PCI-ISA" rev
0x00)
pcibios0: PCI bus #2 is the last bus
WARNING: can't reserve area for I/O APIC.
WARNING: can't reserve area for Local APIC.
bios0: ROM list: 0xc0000/0xc000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX" rev 0x02
cbb0 at pci0 dev 2 function 0 "Toshiba ToPIC97 PCI-CardBus" rev 0x05: irq 11
cbb1 at pci0 dev 2 function 1 "Toshiba ToPIC97 PCI-CardBus" rev 0x05: irq 11
vga1 at pci0 dev 4 function 0 "Chips and Technologies 65555" rev 0xc6
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DBCA-206480>
wd0: 16-sector PIO, LBA, 6194MB, 13424 cyl, 15 head, 63 sec, 12685680
sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
scsibus0 targ 0 lun 0: <TOSHIBA, CD-ROM XM-1802D, 1d21> SCSI0 5/cdrom
removable not configured
atapiscsi0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 7 function 3 not configured
"Toshiba Fast Infrared Type O" rev 0x23 at pci0 dev 10 function 0 not
configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0 cacheline 0x0, lattimer 0x0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 2 device 0 cacheline 0x0, lattimer 0x0
pcmcia1 at cardslot1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
wss0 at isa0 port 0x530/8 irq 10 drq 0: CS4231 or AD1845 (vers 4)
audio1 at wss0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c840 netmask c840 ttymask d8c2
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
ep1 at pcmcia0 function 0 "3Com Corporation, 3C589D, TP/BNC LAN Card Ver.
2a" port 0xa000/16: address 00:10:4b:7d:ef:8f, utp/aui/bnc (default utp)
Alex Holst wrote:
> Isak Lyberth <ily.removesis@cip-global.com> wrote:
>> Hvad skal jeg gøre for at kunne mounte et cdrom drev på min toshiba
>> bærbare?
>
> Du mounter en CDROM, ikke et CDROM drev.
>
>> jeg har cdrom driveren compilet i kernen og i fstab har jeg tilføjet
>> denne linje /dev/cd0a /mnt ro 1 1
>> men når jeg booter op med den linje stopper systemet og siger cant find
>> device /dev/rcd0a (med et r)... hvad gør jeg galt?
>
> Ligger der en CD i drevet?
>
> Aendrer option til "ro,noauto" medmindre du virkeligt har en CD i din
> baerbare hver eneste gang den booter?
>
> Hvis det ikke virker skal vi se din dmesg.
>
|