---

Hvorfor vises mine cd'rom dreve ikke i denne computer?

jeg kan godt finde dem under enhedshåndtering...

---

det står dette i enhedshånteringen:

Windows kan ikke starte denne hardwareenhed, fordi enhedens konfigurationsoplysninger (i registreringsdatabasen) er mangelfulde eller beskadigede. (Kode 19)

Klik på Fejlfinding for at begynde fejlfindingen af denne enhed.

---

har du brugt Easy CD Creator i Windows XP.
der følgene (på engelsk)få at løse det,men på egen risiko:
Start Registry Editor (Regedt32.exe).
Locate the UpperFilters value under the following key in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}

On the Edit menu, click Delete, and then click OK.
Locate the LowerFilters value under the same key in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}

On the Edit menu, click Delete, and then click OK.
Quit Registry Editor.NOTE: After you remove the Upperfilters value and the Lowerfilters value, if you notice lost functionality in a particular program, such as CD recording software, you may need to reinstall that software. If the problem recurs, consult with the software vendor for assistance.
Restart your computer.
eller
reinstall your operating system
men ellers kunne en systemgendannelse måske hjælpe,hvis det er xp,mærkeligt det ikke anbefales.hvis du skal have mere hjælp til det med regestig så sig det evt.

---

LIDT TIL :HØJRE KLIK PÅ CDROM OG VÆLG FJERN GENSTART GENINSTALLER.
CM_PROB_REGISTRY
Text that is displayed in Device Manager:

Your registry might be corrupted. (Code 19)
Solution button: None
Cause
This error message occurs when a device has more than one service defined, if there is a problem opening the Service key, or if you cannot locate the driver name from the Service key.

Troubleshooting
Try removing and reinstalling the device. This action may not resolve the problem, especially if the registry is corrupted. To resolve this error message, restore the registry from a known good backup.

---

xou >>
ingen af tingene hjalp mig

---

øv...kan du få noget ud af det her....
SYMPTOMS
The Component Object Model (COM) ports that you created during the installation of a multiple-port serial adapter do not start, and they are listed in Device Manager with the following error message:

Code 19 - Your registry might be corrupted.
CAUSE
This behavior can occur because many virtual COM ports that are hosted by this type of hardware rely on the standard serial port driver (Serial.sys) that is included with Windows 2000. This driver, however, can start only if there are hardware COM ports that require the driver.
RESOLUTION
To work around this behavior, enable at least one COM port in the basic input/output system (BIOS) so that the Serial.sys file can load properly.
STATUS
This behavior is by design.
MORE INFORMATION
Event Viewer does not display an error message that indicates that the serial driver has not loaded because some computers do not have built-in COM ports. If you change the ErrorControl value in the registry for the serial driver to 0x1, a warning is displayed that indicates that there are no devices that require the driver.

In Device Manager, on the View menu, click Display Hidden Devices to observe whether or not the serial driver has loaded.

---

jeg geninstallerede windows men tak for hjælpen..

Eftersom du ikke er logget ind i systemet, kan du ikke skrive et indlæg til dette spørgsmål.

Hvis du ikke allerede er registreret, kan du gratis blive medlem, ved at trykke på "Bliv medlem" ude i menuen.